OpenRail Overhead Line Designer Help

Assign Feeder Section

Ribbon: Track-side Design > Height Reduction

With the function Assign feeder section it is possible to allocate a catenary height reduction to a feeder. For this feeder the sag and distance calculations will be executed.

Intention

Assign a catenary height reduction to a feeder.

Instructions

  1. Run the Assign Feeder Section function.
  2. Select a catenary height reduction.
  3. Select the feeder, where the catenary height reduction should be assigned to.
  4. Confirm with OK.

Result

Sicat Master will assign the catenary height reduction to the feeder and saves the data into the database.

Parent topic: Height Reduction